Welcome to Widelink technology Co.,Ltd!
中文
Login
Vehicle Tracking Device  User’s Manual

01Vehicle Tracking Device User’s Manual

1. Standard Fittings >>>




2. Parameter>>>



3. Installation Position>>>


The installation position of large and medium-sized vehicles is generally selected at the front desk. The power board is used to take the power, and the GPS host is fixed in the auxiliary storage box. Due to the large size of large and medium-sized vehicles, there are many installation positions.


4. The Wiring Diagram of Master Device>>>



5. Installation Instructions>>>


5.1 Host installation.

Select qualified engineer for installation.

The installation environment should not exceed GSM and GPS performance indicators. Note the fixed position of the antenna to ensure good signal.

The installation position should pay attention to dust and water proof.

Please install the emergency button where you can touch it.

Connect the GSM antenna and GPS antenna, and locate the appropriate position to ensure good reception.

Find the wiring harness with the product, insert the corresponding wiring hole in the product, and follow the circuit of the original car according to the right left diagram.




5.2  SIM card placement.

The SIM card slot will pop up with tweezers or a pointed object and the SIM card slot will pop up. The SIM card slot will be opened and the SIM card will be opened, and the contact will be confirmed and the slot will be restored to its original position.

Please make sure that the SIM card must be GSM network, to open the caller id and the PIN code is in the closed state, unable to open the call transfer function. SMS messages must be in plain text format and cannot be identified in PDU format.

If you need to save the location data or historical data when the device is dropped on GSM, please insert the SD card into the SD card slot of the device.

The second SIM card slot is built inside the machine and needs to be opened.



5.3 Double SIM card

The device supports 2 SIM CARDS, but only one of them can be worked at the same time. When one SIM card is damaged or no GSM network is available, or the GPRS cannot be connected, another SIM card can be switched automatically.

This equipment can solve the problem of the communication signal of the vehicle in the cross-border (two countries) transportation route and help users save roaming charges. If the transportation route crosses three countries, one of the cards needs to open the roaming function.



5.4  Start the equipment.

Connect the power supply to the car 12V or 24V power supply, and after 1 minute, the main engine works normally and then turn on the backup power switch.



5.5 GSM/GPS signal indicator light.

Red light: no GSM network signal.

Red light flash (1 second flash) : GSM network signal is normal, and work in GSM mode.

Red light flashes (3 seconds) : GPRS working mode.

Green light: GPS signal is normal.

Green light: no GPS signal.